Monitor Settings; Turning Activity/Button Sound On/Off; Selecting Measuring Units; Turning Help On/Off - Polar Electro S810i User Manual

Monitor Settings

1. In the Time of Day display scroll up or down
until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
3. Scroll up or down until MONITOR SET is
displayed.
4. Press OK to start the monitor settings.
Sound is displayed.
Turning the Activity/Button Sound on/off
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound on or off. Press OK.
Your receiver has two distinct sounds: activity/button sound and alarms.
This setting includes only the activity/button sound settings.
• Certain Measure and Exercise mode settings will be audible: start, stop,
heart touch function, phase start, phase end and recovery calculation end.
• Heart rate zone alarms, watch alarm or fitness test alarm will make a
distinctly different sound.

Selecting Measuring Units

If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
S810i manual USA GBR A.pm6 34-35
Options
Monitor Set
Sound Units Help
On/OFF 1/2 On/OFF
B 34
7. Scroll to the unit which best suits you. Press OK.
There are two different user information settings.
Units 1: kg, cm, day-month-year Units 2: lbs, feet, month-day-year

Turning Help on/off

If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Help is displayed.
6. Press OK to start setting the Help function. On/OFF starts to flash.
7. Scroll up or down to set the Help on or off. Press OK.
If you turn Help on, the flashing arrows guide you to use the correct
buttons in the Options and File modes. If you want to change the middle
row information during exercise, the function name will appear for a few
seconds.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 35
29.7.2002, 14:14