Monitor Settings; Activity/Button Sound On/Off; Selecting Measuring Units - Polar Electro S725 User Manual

Monitor settings

1. In the Time of day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter the
Options mode. EXERCISE
SET is displayed.
3. Scroll up or down until MONITOR SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.
Turning activity/button sound on/off
If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound On or Off. Press OK.
Activity/button sound consists of the button sound and in the Measuring
and Recording modes the following activity sounds: start, stop and lap
recording, phase start, interval phase end and recovery calculation end
sounds. It does not consist of heart rate zone alarms, watch alarm or fitness
test alarm.

Selecting measuring units

If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down the unit which best suits you. Press OK.
Options
Monitor Set
Sound On/OFF
B 41
Units 1/2 Help On/OFF