Changing The Display In Each Mode - Omron RX Series User Manual

Write Mode
In this mode, the Inverter parameter settings and
Drive Programming program data stored in the LCD
Digital Operator can be all written to the Inverter.
Change the number of storage data by selecting 5. R/W
Storage Mode in the OPTION MODE menu.
For details about the Write Mode, refer to Section 6
Read/Write Functions.
Option Mode
In this mode, the parameter settings of the LCD Digital Operator can be set and changed.
This mode supports the following settings of the LCD Digital
Operator.
1. Language
2. Date and Time
3. Read Lock
4. INV Type Select
5. R/W Storage Mode
6. Backlight Auto-off
7. Backlight Flicker
8. Operator Reset
9. Check Mode
For details about the Option Mode, refer to Section 5 LCD Digital Operator Related Parameters.
4-1-3

Changing the Display in Each Mode

Each display mode can be switched by pressing the
In each mode, press the
Navigation level. To move to the Read or Write Mode, press the
To move to the Option Mode, press the
For the transition between display modes, refer to the figure in 4-1-1 Transition of Screens on page 4-2.
LCD Digital Operator User's Manual (I579)
key to move to the Edit level and press the
, , and
4 Operation Procedures
Case: 5. R/W Storage Mode = "01 :Single"
Case: 5. R/W Storage Mode = "02: Quad"
or key in the Navigation level.
key to move to the
or key.
keys simultaneously.
4
4 - 5