Operation Keys - Omron RX Series User Manual

2 Part Names and Functions
2-2

Operation Keys

No. Key image
1
2
3
4
5
6
2 - 4
Name
Switches between the Local and Remote modes. If the key is
pressed for 2 seconds or more, the mode is switched; from
Local to Remote or from Remote to Local. When the LCD
LOCAL REMOTE
Digital Operator is in the Local mode, the Remote (OPE) LED
key
is lit. Use the Local mode to operate the Inverter using the
LCD Digital Operator's operation keys (FWD RUN, REV RUN,
and STOP/RESET).
Reads all the parameter setting data into the LCD Digital
Operator's memory. For details, refer to Section 5 LCD Digital
Operator Related Parameters.
READ key
Copies a single set of Inverter parameter setting data, or a
single set of Inverter parameter setting data and a Drive
Programming program, stored on the LCD Digital Operator
WRITE key
into the Inverter. For details, refer to Section 5 LCD Digital
Operator Related Parameters.
Returns to a screen in the one level higher layer.
If pressed during a parameter change, the LCD Digital
ESC key
Operator displays the previous screen with the change
cancelled.
Brings you forward to the screen that is one level lower in the
hierarchy.
Enter key
If pressed during a parameter change, the LCD Digital
Operator displays the previous screen with the change fixed
and stored.
Moves the cursor up.
It is also used to increase the parameter number or parameter
Increment key
value.
Operation keys
Function
LCD Digital Operator User's Manual (I579)