Quad Read Function - Omron RX Series User Manual

6 Read/Write Functions
6-3

Quad READ Function

The Quad READ function is enabled when 5. R/W Storage Mode in the OPTION MODE menu is set to "02: Quad".
The Quad READ function provides the following two operations.
• Reads a single set of all Inverter parameter setting data and stores up to four sets in the specified
memory number 1 to 4.
• Reads a single set of all Inverter parameter setting data and a Drive Programming program, and
stores the data in the memory number 1. At this time, the Drive Programming program is stored in the
other three sets of internal memory.
Press the
Press the
and press the
01: Read Data (reads a single set of all Inverter parameter setting data)
02: Read Data+EzSQ (reads a single set of all Inverter parameter setting data and a Drive
Programming program)
05: Cancel (cancels the read operation)
When reading is completed, the screen returns to the previous screen.
For the Quad VERIFY function, refer to 6-4 Quad VERIFY Function on page 6-6.
Note In the LCD Digital Operator, the Drive Programming is named as "EzSQ".
6 - 4
key. When the READ screen appears, select the memory number to store the data.
key. The Select data is displayed. Select one of the following operations to execute
key again.
When no Inverter parameter setting data is stored in the LCD Digital Operator,
"--" is shown.
For selection of number to store the Inverter parameter setting data, press the
or
After pressing the
under Select data.
01: Read data (reads parameter setting data)
02: Read data+EzSQ (reads parameter setting data and a Drive
Programming program)
03: Verify data (verifies parameter setting data)
04: Verify EzSQ (verifies a Drive Programming program)
05: Cancel (cancels the operation)
Note When the memory number 2, 3, or 4 is selected, the above three
selection numbers (01, 03, and 05) are displayed.
Select "01: Read data" or "02: Read data+EzSQ" and press the
fix.
key to move the cursor and press the
key, you can select one of the following operations
LCD Digital Operator User's Manual (I579)
key to fix.
key to