Omron E5CK User Manual page 34

Setting Example
1 second min.
About the Decimal
Point of the Alarm
Value
When a set point for a humidity exceeds 10.0%, alarm1 will be output.
In this example, let's set the parameters as follows:
"alarm type 1"
"alarm value 1"
"alarm hysteresis"
"close in alarm/open in alarm"= "
Meanings of parameters, "alarm histeresis" and "open in alarm/close in
alarm" are the same settings at the shipment, so settings for operations
are omitted.
(1) Select the menu display, and select [
or keys. For details on selecting the menu display, see page 1-7.
(2) Press the key to enter the setup mode. The top parameter in the
setup mode [
parameter setting is "17: 4 to 20 mA".
(3) Press the key until [
played. The parameter default is "2: deviation upper limit".
(4) Press the key to return to "1: deviation upper and lower limit".
(5) Select the menu key, and select [
or keys. For details on selecting the menu display, see page 1-7.
(6) Press the key to enter the level 1 mode. The top parameter in the
level 1 mode [
(7) Press the key until [
played.
(8) In this example, the parameter setting is "0.0" so press the
until "10.0" is displayed.
The decimal point of the alarm value conforms to the setting of the "decimal point"
parameter (setup mode). In this example, the "decimal point" parameter is set to
"1". (During temperature input, the decimal point of the alarm value conforms to
the set sensor.)
= "1: (deviation upper-and lower-limit)"
= "10.0"
= "0.20"
: close in alarm"
] (setup mode) using the
] "input type" is displayed. In this example, the
] ("alarm type 1" parameter) is dis-
] (level 1 mode) using the
] "AT execute/cancel" is displayed.
] ("alarm value 1" parameter) is dis-
3.4 Setting Alarm Type
key
3--9