Omron E5CK User Manual page 118

J Characteristics
Indication Accuracy
Temperature variation influ-
ence (*2)
Voltage variation influence
(*2)
Hysteresis
Proportional Band (P)
Integral (reset) Time (I)
Derivative (rate) Time (D)
Control Period
Manual Reset Value
Alarm Setting Range
Sampling Period
Insulation Resistance
Dielectric Strength
Malfunction 10 to 55 Hz, 10 m/s
Vibration Vibration
Resistance
Destruction
Malfunction
Shock Resis-
tance tance
Destruction
Weight
Enclosure Ratings
Memory Protection
*1The indication accuracy of the K1, T, and N thermocouples at a temperature of -100°C or less is ±2°C ±1 digit maximum. The
indication accuracy of the U, L1 and L2 thermocouples at any temperature is ±2°C ±1 digit maximum.
The indication accuracy of the B thermocouple at a temperature of 400°C or less is unrestricted.
The indication accuracy of the R and S thermocouples at a temperature of 200°C or less is ±3°C ±1 digit maximum.
The indication accuracy of the W thermocouple is ±1 digit max. of whichever is the greater of ±0.3% or ±3°C of the indicated
value.
The indication accuracy of the PLII thermocouple is ±1 digit max. of whichever is the greater of ±0.3% or ±2°C of the indicated
value.
*2 Ambient temperature: ---10°C to 23°C to 55°C
Voltage range: ---15 to +10% of rated voltage
*3 Write operations: Parameter changes, remote/local selection, etc.
Thermocouple:
(±0.3% of indication value or ± 1°C, whichever greater) ± 1 digit max. (*1)
Platinum resistance thermometer:
(±0.2% of indication value or ± 0.8°C whichever greater)± 1 digit max.
Analog input: ±0.2%± 1 digit max.
Platinum resistance thermometer:
(±1% of PV or ± 2°C, whichever greater) ±1 digit max.
Thermocouple (R, S, B, W):
(±1% of PV or ± 10°C, whichever greater) ±1 digit max. (±1% of PV or ± 10°C whichever greater) ±1 digit max
Other thermocouples (K1, K2, J1, J2, E, N, T, L1, L2, U, PLII):
(±1% of PV or ± 4°C, whichever greater) ±1 digit max.
Analog input (current, voltage, or remote SP input): ±1%FS±1 digit max.
0.01 to 99.99%FS (in units of 0.01%FS)
0.1 to 999.9% FS (in units of 0.1%FS)
0 to 3999 s (in units of 1 second)
0 to 3999 s (in units of 1 second)
1 to 99 s (in units of 1 second)
0.0 to 100.0% (in units of 0.1%)
-1999 to 9999 or -199.9 to 999.9 (decimal point position dependent on input
type)
Temperature input: 250 ms, Analog input: 100 ms
20 MΩ min. (at 500 VDC)
2000 VAC, 50/60Hz for 1 min (between terminals of different polarities)
2
(1G) for 10 min each in X, Y, and Z directions
2
10 to 55 Hz, 20 m/s (2G) for 2hrs each in X, Y, and Z directions
2
200 m/s min. (20G), 3 times each in 6 directions (100 m/s
relay)
2
300 m/s min. (30G), 3 times each in 6 directions
Approx. 170 g, adapter: approx. 10 g
Front panel: NEMA4 for indoor use (equivalent to IP66)
Rear case: IEC standard IP20
Terminals: IEC standard IP00
Non-volatile memory (Write operation : 100000 max.) (*3)
SPECIFICATIONS
2
(10G) applied to the
A--3