Ieee802.1X; Imux - TANDBERG Codec 3000 MXP Reference Manual

Configuration-type Commands – xconfiguration / configuration.xml

IEEE802.1x

— IMUX

cont...
IEEE802.1x Mode: <On/Off>
Enables/disables 802.1x authentication
xconfiguration ieee802.1x mode: on
Example:
IEEE802.1x AnonymousIdentity: <S: 0, 64>
The 802.1x Anonymous ID string is to be used as unencrypted identity with EAP types that support different tunneled identity, EAP-PEAP and
EAP-TTLS. The anonymous ID, if set, will be used for the initial (unencrypted) EAP Identity Request
xconfiguration ieee802.1x anonymousidentity:
Example:
IEEE802.1x Identity: <S: 0, 64>
The 802.1x Username is the username needed for 802.1x authentication.
Example: xconfiguration ieee802.1.x identity: MyString
IEEE802.1x Password: <S: 0, 64>
The 802.1x Password is the password needed for 802.1x authentication.
xconfiguration ieee802.1x password: MyPassword
Example:
IEEE802.1x EAP-MD5: <On/Off>
Enables/disables the EAP-MD5 protocol
xconfiguration ieee802.1.x eap-md5: on
Example:
IEEE802.1x EAP-TTLS: <On/Off>
Enables/disables the EAP-TTLS protocol
Example: xconfiguration ieee802.1.x eap-ttls: on
IEEE802.1x EAP-PEAP: <On/Off>
Enables/disables the EAP-PEAP protocol
xconfiguration ieee802.1.x eap-peap: on
Example:
IMUX Custom
IMUX Custom
IMUX Custom
D 13887.08
MAY 2008
BW64 Prefix: <S: 0, 12>
Defines the prefix to be used with the RS366 Custom IMUX at this bandwidth.
xconfiguration imux custom bw64 prefix: xxx
Example:
BW64 Suffix: <S: 0, 12>
Defines the suffix to be used with the RS366 Custom IMUX at this bandwidth.
Example: xconfiguration imux custom bw64 suffix: xxx
BW64R Prefix: <S: 0, 12>
Defines the prefix to be used with the RS366 Custom IMUX at this restricted bandwidth.
xconfiguration imux custom bw64r prefix: xxx
Example:
84
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
The system may be connected
to an IEEE 802.1x LAN net-
work. Supported 802.1x proto-
cols are EAP-MD5, EAP-PEAP
and EAP-TTLS.
MXP