Localentryadd; Localentrydelete; Messageboxdelete - TANDBERG Codec 3000 MXP Reference Manual

Command Information
LocalEntryAdd — MessageBoxDelete
Command Description

LocalEntryAdd

Command used to
add a new entry to the
Directory stored locally.
The entry is stored in
the first vacant position
in the Directory.

LocalEntryDelete

Command used to
delete an entry in the
locally stored Directory.

MessageBoxDelete

Command used to
delete a message box
on the screen.
Required parameters are identified by an (r) appended to the parameter name. The
D 13887.08
MAY 2008
Parameters
Name: <S: 0, 48>
The entry's name.
Number: <S: 0, 60>
The entry's number.
SecondNumber: <S: 0, 60>
The entry's second number (2XH221
number).
SubAddress: <S: 0, 10>
The entry's sub address.
CallRate: <Tlph/1xh221/
2xh221/64/128/
192/256/320/384/512/768/115
2/1472/1920/2560/3072/4096/
H0/Max/Auto>
The callrate to use when calling this
entry.
Restrict: <On/Off>
Whether to use restrict or not when
calling this entry.
NetProfile: <1..7>
The Net Profile to use when calling
this entry.
LocalEntryId(r): <1..200>
Reference to the entry to delete.
None
(r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Result parameters Result parameters
when OK when error
As above
LocalEntryId:
<1..200>
Reference to the
Directory position
the entry is stored.
None As above
None As above
159
TANDBERG 3000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Example
xcommand localentryadd name:"John Galt"
number:123
*r Result (status=OK):
LocalEntryId: 17
*r/end
OK
xcommand localentrydelete localentry-
id:66
*r Result (status=OK):
*r/end
OK
xcommand messageboxdelete
*r Result (status=OK):
*r/end
OK
& 6000 MXP