Cameratracking - TANDBERG Codec 3000 MXP Reference Manual

Status Information – xstatus /xstatus.xml

CameraTracking

CameraTracking (status = On / Off):
On / Off
If status = the following will be included:
<Nothing>
Example:
*s CameraTracking (status=Off): /
*s/end
*s CameraTracking (status=On): /
*s/end
Status information followed by a
D 13887.08
MAY 2008
*
will not be shown unless Detailed Level has been set to 2 – see
184
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
XACLI – Special commands – xpreferences
TANDBERG 3000 MXP & 6000 MXP