Preset - TANDBERG Codec 3000 MXP Reference Manual

Configuration-type Commands – xconfiguration / configuration.xml

Preset

Preset [1..15] Name: <S: 0, 20>
Defines the Preset Name.
xconfiguration preset 1 name: AnyName
Example:
Preset [1..15] Audio
Preset [1..15] Audio
Preset [1..15] MainVideoSource: <1/2/3/4/5/6>
Example: xconfiguration preset 1 mainvideosource: 1
Preset [1..15] DuoVideoSource: <0/1/2/3/4/5/6>
xconfiguration preset 1 duovideosource: 1
Example:
Preset [1..15] SwitchVideoSource: <0/1/2/3/4/5/6>
Will switch the TANDBERG Video Switch to the given input when the preset is activated.
xconfiguration preset 1 switchvideosource: 1
Example:
Preset [1..15] Camera
D 13887.08
MAY 2008
Inputs Microphone [1..3]
Inputs Line [1..3]
Brightness Mode: <Manual/Auto>
Interpretation of the settings chosen will depend on the camera type you use. If in doubt,
consult your camera's user documentation.
xconfiguration preset 1 camera brightness mode: auto
Example:
Mode: <On/Off>
xconfiguration preset 1 audio inputs mi-
Example:
crophone 2: on
Mode: <On/Off>
xconfiguration preset 1 audio inputs line
Example:
2: on
106
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Presets should never be
modified manually, except for the
Preset Name.
Please refer to the xcommands:
- PresetStore
- PresetClear
NOTE! The preset configura-
tions are numbered from 1 to
15, whilst the PresetStore/
PresetClear
commands are referring presets
from 0 to 14, i.e. the configura-
tions are offset by 1.
MXP