Keyrelease; Keypress; Keydisable; Keyenable - TANDBERG Codec 3000 MXP Reference Manual

Command Information
KeyRelease — KeyEnable
Command Description

KeyRelease

Command used to
emulate release an
already pressed key on
the TANDBERG MXP
remote control. The
KeyRelease command
should be preceded by
a KeyDown command to
emulate pressing the key.

KeyPress

Command used to
emulate pressing a
key on the TANDBERG
MXP remote control
for a short while. This
command needs no
release command.

KeyDisable

Command used to
disable a key on the
TANDBERG MXP remote
control.

KeyEnable

Command used to
enable a key on the
TANDBERG MXP remote
control.
Required parameters are identified by an (r) appended to the parameter name. The
D 13887.08
MAY 2008
Parameters
Key(r): <0/1/2/3/4/5/6/7/8/
9/*/#/Connect/Disconnect/
up/Down/Right/Left/Selfview/
Layout/Phonebook/Cancel/
MicOff/Presentation/Volumeup/
VolumeDown/OK/ZoomIn/
ZoomOut/Grab>
Key(r): <0/1/2/3/4/5/6/7/8/
9/*/#/Connect/Disconnect/
up/Down/Right/Left/Selfview/
Layout/Phonebook/Cancel/
MicOff/Presentation/Volumeup/
VolumeDown/OK/ZoomIn/
ZoomOut/Grab>
Key(r): <0/1/2/3/4/5/6/7/8/
9/*/#/Connect/Disconnect/
up/Down/Right/Left/Selfview/
Layout/Phonebook/Cancel/
MicOff/Presentation/Volumeup/
VolumeDown/OK/ZoomIn/
ZoomOut/Grab>
Key(r): <0/1/2/3/4/5/6/7/8/
9/*/#/Connect/Disconnect/
up/Down/Right/Left/Selfview/
Layout/Phonebook/Cancel/
MicOff/Presentation/Volumeup/
VolumeDown/OK/ZoomIn/
ZoomOut/Grab>
(r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Result parameters Result parameters
when OK when error
None As above
None As above
None As above
None As above
158
TANDBERG 3000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Example
xcommand keyrelease key: phonebook
*r Result (status=OK):
*r/end
OK
xcommand keypress key: phonebook
*r Result (status=OK):
*r/end
OK
xcommand keydisable key: micoff
*r Result (status=OK):
*r/end
OK
xcommand keyenable key: micoff
*r Result (status=OK):
*r/end
OK
& 6000 MXP