Command Information
FeedbackRegister — FloorRequest
Command
Description
FeedbackRegister
Command used to
instruct the system to
return XML feedback
over HTTP(S) to
specific URLs. What
parts of the Status
and Configuration XML
documents to monitor
are specified by XPath
expressions.
The system supports
issuing feedback to 3
different URLs.
The system allows
a total of 20 XPath
expressions to be
registered, with a
maximum of 15 for a
single URL.
FIPSMode
Command to activate
and deactivate FIPS
mode.
FloorRelease
Command used to
release floor in a
MultiSite conference.
FloorRequest
Command used to
request floor in a
MultiSite conference.
Required parameters are identified by an
(r)
appended to the parameter name. The
D 13887.08
MAY 2008
Parameters
ID: <1..3>
ID for the registration. If this
parameter is omitted the system
uses the first vacant ID.
uRL(r): <S: 0, 256>
The URL to post feedback to.
Expression.1..15: <S: 0, 256>
XPath expression
Mode(r): <On/Off>
Denotes whether the video system is
to be in FIPS mode or not.
None
None
(r)
appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Result parameters
Result parameters
when OK
when error
As above
ID: <1..3>
On: "Entering FIPS
As above
mode, restart
required."
Off: "Exiting FIPS
mode, restart
required."
The codec wil
restart.
None
As above
None
As above
156
TANDBERG 3000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Example
xcommand feedbackregister url:http://10.
47.14.185:8000
expression.1:status/call
expression.2:status/conference
*r Result (status=OK):
ID: 2
*r/end
OK
xcommand fipsmode:off
*r Result (status=OK):
*r/end
OK
xcommand floorrelease
*r Result (status=OK):
*r/end
OK
xcommand floorrequest
*r Result (status=OK):
*r/end
OK
& 6000
MXP