TANDBERG Codec 3000 MXP Reference Manual page 177

Status Information – xstatus /xstatus.xml
Call
cont...
Dialing / Alerting / Proceeding / EstablOut / EstablIn / AwaitInCnf / Connected / Disconnecting / Await2ndnr / ClearOut / ClearIn / Syncing / Capex / Synced / Unframed
If status =
Vtlph
and type =
H323 / SIP
and protocol =
Incoming / Outgoing
and direction =
x
and logTag =
the following will be included:
CallRate: 64 / 128 / .. / 4096
RemoteNumber:
RemoteSubAddress:
IncomingNumber:
IncomingSubAddress:
Mute: On / Off
Microphone: On / Off
Duration: 0...
MuteOutgoing: On / Off
Channels [1..2] Incoming / Outgoing):
(type =
Incoming / Outgoing
If type = the following will be included:
Rate: 64 / .. / 4096
Restrict: On / Off
Encryption Off / Negotiate /
(status =
Off / Negotiate
If status = the following will be included:
<Nothing>
On
If status = the following will be included:
Type: DES / AES-128
CheckCode:
Audio Active / Inactive):
(status =
If status = Inactive the following will be included:
<Nothing>
Status information followed by a
D 13887.08
MAY 2008
On):
*
will not be shown unless Detailed Level has been set to 2 – see
Appears for incoming calls only
XACLI – Special commands – xpreferences
177
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP