Transmitting And Receiving In Polling Mode - Olivetti Fax-Lab 480 Instructions Manual

3. Press the key:
The display shows:
4. Press the key
until the display shows:
5. To display the other "ECM:OFF" option, press the key:
/
6. To confirm the selection, press the key:
7. To return the fax machine to the stand-by mode, press the
key:
T
RANSMITTING AND RECEIVING IN POLLING
MODE
W
HAT POLLING MEANS
It is a transmission request that a fax machine makes to another fax
machine so that the latter sends the document requested automatically.
There are two main characteristics of communication using the polling
method:
• the user who is to receive the document requests
transmission. In other words, a user may connect to another fax
machine and request it to send a document (specifically prepared)
to him, even when the user at the other end of the line is out.
• the transaction is paid for by the person who requested
transmission (that is, the user who receives the document) and
not the person whose fax machine sends the document.
T
RANSMITTING A DOCUMENT IN POLLING MODE
( )
POLLING RECEPTION
Arrange with your correspondent the time at which you intend
to make the transmission request so that he has time to put
the document to be sent in his fax machine. Then set up
your fax machine to receive the document, by programming
the dialling mode to be used to call your correspondent and
the time at which you wish to receive the document.
1. Press the key
until the display shows:
2. Press the key:
The display shows:
You can confirm the current time or overwrite with a new
one, for example "06:20 PM".
3. To overwrite the current time, press the keys:
-
4. To confirm the entry or the current time, press the key:
The display shows:
Dial the correspondent's number using any of the available
methods: directly on the numeric keypad or using the one-
touch dialling keys or speed dialling codes.
5. For one-touch dialling or speed dialling press the keys:
-
6. To confirm the entry, press the key:
The fax machine shows the message "POLL SET" for a few
seconds and then returns automatically to the stand-by
status. The second line of the display shows: "POLL. RX:
06:20 PM".
Note
You can cancel polling reception.
1. To do so, press the
C
HANGING OR DELETING AN ALREADY MADE POLLING
RECEPTION SETTING
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
You can choose the following options:
CANCEL SETTING? - To cancel the setting. The fax machine
returns to its stand-by status.
CHANGE PARAM.? - To change the time at which the
transmission request is to be made or the number of the
correspondent from whom you want to receive the
document.
4. To view the other available option: "CANCEL SETTING?",
press the key:
/
key.
41