Date And Time - Siemens Gigaset SX303isdn User Manual

Date and Time

Date and Time
Setting the date and time
The first time you make a call on your phone, the date and time are transmitted by the
exchange.
You can choose between the 12 hour and the 24 hour display (factory setting) for the
time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
i
s
Set base
s
Settings
s
System settings
s
Date/time
either ...
s
12 hours
s
Date DD.MM
or ...
Set time
~
W
Save entry
Activating/deactivating time display
You can activate and deactivate the display of the date and time in your base station's
idle display.
i
s
Settings
s
Time display
j
86
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select display modes:
If necessary, choose between
OK
display (‰ = on).
If necessary, choose between
OK
Date) and
Date MM.DD
Setting the date and time:
Select the menu item and confirm.
OK
Enter the date and time. If necessary skip settings
that are already correct using u v.
If necessary, in the
keys and
AM PM
Press the display key to open the submenu.
Select and confirm to store the setting.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm (‰ = on).
OK
Hold down (back to idle status).
12 hours
Date DD.MM
(Date-Day) display (‰ = on).
display use the display
12 hours
to switch between am and pm.
- and
24 hours
(Day-