Preparing the base station for use
Pin assignment of cable supplied
As there are two different pin assignments for analogue devices (3/4 or 2/5), the cable
supplied (see diagram) is designed in such a way that it can always be used to establish
a connection between the base station and the analogue add-on device to be
connected. If you do not know the pin assignment of your analogue add-on device,
connect the two devices as you wish. If the connection is unsuccessful, you can reverse
the pin assignment by turning the cable and thus automatically select the correct
assignment.
3 4
For PC connection only:
i
Plug USB cable into the base station, but do not connect to the PC yet.
Do not connect the USB cable until you are prompted to do so by the
talk&surf wizard program on the PC.
Operating the base station – menu system
Display keys
The display keys are the horizontal rocker keys just below the display. Their function
changes depending on the particular operating situation. The current function is shown
in the display directly above the key to which it relates.
Example:
10
Y Z
{
2
Display key functions
(depending on the operating situation)
Display keys
5