The Getting started wizard cannot be used simultaneously by multiple
◆
internal users.
If there is already settings data (factory default or previous settings),
◆
this data is shown at the appropriate positions in the display and can
i
be modified there.
To cancel the Getting started wizard, press the exit menu key and
◆
hold. All changes you have already saved using Save entry
retained. The base station returns to idle status.
To skip a setting, press the display key
◆
Setting the date and time:
Depending on the network provider, the date and time are adopted automatically from
the telephone network during the first outgoing call.
The display shows: Enter time?
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
YES
~
W
Save entry
If the time should be displayed in 12-hour mode, you can modify the setting later
(page 86).
Show/hide answering machine (on SX353isdn):
The answering machines AM1, AM2, and AM3 are available. You can use the answering
machine when it is shown. By default, all answering machines are shown.
The display shows: Suppress display of AM1?
Respond with
, if you want to hide AM1,
◆
YES
with
, if you want to use AM1.
◆
NO
This sequence will then be repeated for AM2 and AM3.
i
An answering machine can only be hidden if there are no messages/
memos stored in it (page 77).
Entering your phone numbers (MSNs) and names for MSNs:
Many connections allow your telephone to request the MSN automatically upon
connection.
Precondition:You have a connection that supports this feature.
The display shows: Find own numbers (MSN)?
Press the display key to set the date and time.
Enter the date (6-digit) and time (4-digit in 24-hour
mode) in series, e.g. 101204 0945 for 12/10/04
9:45 a.m..
Press the display key to open the submenu.
Select the menu item and confirm.
OK
Preparing the base station for use
.
§NO§
are
§§OK§§
17