Assigning An Msn A Ringer Melody; Setting Up Rejecting For The Entire Msn Group - Siemens Gigaset SX303isdn User Manual

System settings

Assigning an MSN a ringer melody

Each receive MSN is assigned a ringer melody when setting up. You can change this
assignment for each receive MSN individually. This means that all terminals will use this
ringer melody to indicate an incoming call to a receive MSN.
In place of ringer melodies 1-20, you can also assign the "Device ringer"
i
to an MSN. The handsets assigned to the receive MSN will then use the
ringer melody set on the handset for external calls (page 114).
i
s
Set base
s
Settings
~
OK
s
ISDN settings
Set up MSN
s
MSN1:
s
Ringer melody
u v
j

Setting up rejecting for the entire MSN group

You can reject an external call not only on your base station, but for all members of an
MSN group. Pressing
The entire group will no longer be called. A waiting call can also be rejected during a
call. The call is added to the caller list.
Precondition: The analogue connection must be set to No function (page 129).
By factory default, the function is not activated.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Reject all
j
98
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Confirm.
OK
W
Select MSN and open submenu, e.g. MSN1: Anna.
Select the menu item and confirm.
OK
Select melody (1 – 10, Device ringer) and confirm,
e.g. Ringer melody: 5.
Hold down (back to idle status).
will give the caller a busy signal instead of a ringing tone.
REJECT
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).