Configuring Bluetooth Devices - Siemens Gigaset SX303isdn User Manual

Operating with other devices
When registering, the base station saves either the name transferred by the PC/PDA
(Bluetooth device name, max. 16 characters) or the default name BT PC/PDA. The
display on the base station is accompanied by the automatically assigned internal
number. For details of how you can change the name, see page 128.

Configuring Bluetooth devices

The devices can only be configured on the base station, i .e. not on a handset.
Phone numbers transferred from the GSM network always contain the
international country prefix (country code). A special setting is therefore
i
necessary for the country code, if you have received a call from the GSM
network, the number has been transferred to the Phonebook or the caller
list and you then want to call back via the ISDN network from the
Phonebook or the caller list, (page 109).
Changing the name of a Bluetooth device
i
s
Bluetooth
s
Set up BTdevice
s
BT headset
Name
~
W
Save entry
Changing the ringer melody for calls on GSM mobile phone
i
s
Bluetooth
s
Set up BTdevice
s
GSM phone
s
Ringer melody
v
OK
128
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm. A list of
OK
registered Bluetooth devices is displayed.
W
Select the device (e.g. BT headset) and press the
display key to open the submenu.
Select the menu item and confirm.
OK
Edit the name and press the display key to open the
submenu.
Select the menu item and confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm. A list of
OK
registered Bluetooth devices is displayed.
W
Select the device and press the display key to open
the submenu.
Select the menu item and confirm.
OK
Select ringtone and confirm.