Assigning Internal Users To The Entrance Telephone Call Group - Siemens Gigaset SX303isdn User Manual

s
Setup device
s
INT21: Int.21
either ...
s
Door code
~
or ...
s
Hunt group code
~
or ...
s
Connection code
~
or ...
s
Release code
~
... then
W
Save entry

Assigning internal users to the entrance telephone call group

If you have set up an entrance telephone (page 140), all internal users registered on the
base station are automatically assigned to the entrance telephone call group. You can
change this assignment.
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
INT11: Int.11
s
Door call grp.
Select the menu item and confirm.
OK
W
Select internal user and open submenu.
Set door opener code:
Select the menu item and confirm (
OK
Enter code (preset = #9).
Set group call code:
Select the menu item and confirm (
OK
Enter code (preset = 8).
Set connection code:
Select the menu item and confirm (
OK
Enter code (preset = 9).
Set disconnection code:
Select the menu item and confirm (
OK
Enter code (preset = #0).
Press the display key to open the
submenu.
Confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Select internal user and open submenu,
e.g. INT11: Int.11.
Select the menu item and confirm (
OK
Operation of entrance telephone
‰
‰
‰
‰
‰
= on).
= on).
= on).
= on).
= on).
141