Conference Call - Siemens Gigaset SX303isdn User Manual

Functions during a call

Conference call

Precondition: You have established an enquiry call (page 29 and page 30).
There is both an active call (the one established with an enquiry call) and a held call
(the first). In a conference call you can speak to both other callers at the same time.
You can make a conference call with
i
◆
◆
It is possible to conduct two conference calls at the same time on your base station.
Establishing a conference
You are making an enquiry call. The first caller is put on hold.
Press the display key
Ending a conference
You have several options for ending a conference call:
either ...
a
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
INDIV.
32
two external users or
with one internal user and one external user.
to establish conference switching.
CONF.
You end the conference:
Replace the receiver (return to idle status).
You change the conference to an enquiry call:
Press the display key to change the conference
switching to an enquiry call (page 29 or
page 30).The connection that was active
immediately before the conference was established
becomes the active call again.