System Settings; System Update - Panasonic Diga DMR-EX89EB Operating Instructions Manual

System Settings


Others
( 70, Accessing the Setup Menu)
All factory default settings are indicated with "Underlined" text.
Others
, select "Others"
OK
Setup
Remote Control
Clock
Owner ID
Tuning
Setting for Standby
Disc
DivX Registration
Picture

System Update

Sound
Initialize
Display
SELECT
Connection TAB
RETURN
Others
Remote Control (
[DVD 1] [DVD 2] [DVD 3]
Clock ( 14)
Owner ID ( 13)
In order to prevent another person from using this unit if it is stolen,
you can set a PIN number and input your personal information.
Once the PIN number has been set, you cannot return to the factory
preset. Make sure not to forget this.
 PIN number
 Name
 House No.
 Postcode
Setting for Standby
 Press [OK] to show the following settings.
Power Save
[On] Power consumption is minimized when the unit is turned
to standby (
[Off] This sets to Quick Start Mode.
 Refer to the chart for the Power Save function features (
when the unit is turned off.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has fi nished operating, the unit will be turned off
once the set time has passed.
[2 hours] [4 hours]
[Off] The unit will not automatically turn off.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (
76
RQT9463

Setup
 ,  select item
DVD 1
86)
98).
[6 hours]
39).
System Update
In order to update this unit, the TV Guide download, and support
system changes made by broadcasts, this unit periodically performs
software updates.
 Press [OK] to show the following settings.
 Update data and TV Guide download information are sent by an
unscheduled digital broadcast. In order to receive these updates, you
must be able to receive digital broadcasts.
 An update will take approximately 60 minutes. While the update is in
progress, "SW-DL" appears on the unit's display.
You cannot operate the unit until the update is complete.
Removing the AC mains lead while the update is in progress may
damage the unit.
 An TV Guide download will take approximately 30 minutes.
While the TV Guide download is in progress, "GUIDE" appears on
the unit's display. The TV Guide download can be interrupted by
switching on the unit.
 To avoid hearing the startup sound of System Update for the unit,
perform the following steps.
– Select the time for Software Update (
Software search period).
– Set "TV Guide Download in Standby" and "Software Update in
Standby" ( below) to "Off", and update manually (
Software Update Search Now).
TV Guide Download in Standby
[On] When the unit is turned off, TV Guide data is downloaded
automatically.
[Off]
Software Update in Standby
[On] You can perform the unit updates automatically when the
unit is turned off.
[Off]
TV Guide/Software search period
Selects the time to automatically perform TV Guide download and
updates when the unit is turned off. This can only be set when "TV
Guide Download in Standby" and "Software Update in Standby" is
set to "On".
 If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
When the GUIDE Plus+ system is not available
[Automatic] The unit will give priority to searching for update data
at midnight.
[02:00–06:00] [06:00–10:00] [10:00–14:00]
[14:00–18:00] [18:00–22:00] [22:00–02:00]
When the GUIDE Plus+ system is available
[Automatic]
[Daytime] Updating is executed during daytime (06:00–22:00).
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not turn
this unit off during the update. This could result in the loss of data.
13)
A message shows that the update has fi nished.
 If applicable update data is found, press [, ] to select "Yes",
then press [OK].
GUIDE Plus+ System Information
You can check the condition of GUIDE Plus+ system of this unit.
Post Code
You can input the postal code which is nessesary to download area
specifi c information of GUIDE Plus+ system.
Initialize
 Press [OK] to show the following settings.
Shipping Condition
This returns Setup menus to default settings, except for the ratings
level, ratings password, Owner ID and clock settings.
[Yes] [No]
 The timer recording programmes are also cancelled.
 Recordings on the HDD will not be deleted.
Default Settings
This returns Setup menus to default settings, except for the tuning
settings, clock settings, disc language settings, ratings level,
ratings password, Owner ID and remote control code.
[Yes] [No]
 The timer recording programmes are also cancelled.
 Recordings on the HDD will not be deleted.
below, TV Guide/
below,