Divx Registration; System Update; Shipping Condition; Default Settings - Panasonic DMR-EX71S Operating Instructions Manual

Quick Start
1 Sec. Quick Start for Recording & EPG Display
(When connecting to TV using 21-pin Scart, COMPONENT
VIDEO, VIDEO or S VIDEO terminals)
From the power on, recording on DVD-RAM and HDD starts in
about 1 second after the REC button is pressed. If the GUIDE
button is pressed while the unit is off, the Electronic Program
Guide (EPG) displays in less than 1 second. (Quick Start Mode)
[On]
[Off] Standby power consumption is less than when this is set to
"On".
(If this is set to "On", "Power Save" is automatically turned to
"Off".)
≥Startup takes up to a minute when:
– You play a disc or start recording to discs other than DVD-
RAM.
– You want to make other operations.
– The clock has not been set.
≥Depending on the type of TV or the connected terminal, it may
take time to display the screen.

DivX Registration

You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content ( 33).

System Update

In order to update this unit's software, the TV Guide download,
and to support system changes made by broadcasts, this unit
periodically performs software updates.
Press [OK] to show the following settings.
≥Update data and TV Guide download information is sent by an
unscheduled digital broadcast. In order to receive these
updates, you must be able to receive digital broadcasts.
≥An update will take approximately 60 minutes. While the update
is in progress, "SW-DL" appears on the unit's display. You
cannot operate the unit until the update is complete. Removing
the AC mains lead while the update is in progress may damage
the unit.
≥TV Guide download will take approximately 60 minutes. While
the TV Guide download is in progress, "GUIDE" appears on the
unit's display. The TV Guide download can be interrupted by
switching on the unit.
TV Guide Download in Standby
[On] When you set this unit to standby mode, TV Guide data
is downloaded automatically.
[Off]
≥To select the time to download in standby mode (
Guide/Software search period)
Software Update in Standby
[On] When you set this unit to standby mode, software
updates are downloaded automatically.
[Off]
TV Guide/Software search period
Selects the time to automatically perform TV Guide download
and updates when the unit is set to standby mode. This can only
be set when "TV Guide Download in Standby" and "Software
Update in Standby" is set to "On".
≥If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
[Automatic]
§
[02:00–06:00] [06:00–10:00]
[14:00–18:00] [18:00–22:00]
The unit will give priority to searching for TV Guide download
§
and update data at midnight.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not turn
your unit off during the update. This could result in the loss of
data. A message shows that the update has finished.
≥If applicable update data is found, press [2, 1] to select "Yes"
and press [OK].
below, TV
[10:00–14:00]
[22:00–02:00]
TV Guide Update Search Now
Start the search for new TV Guide data manually.
Do not turn your unit off during the update. This could result in
the loss of data. A message shows that the update has finished.
≥It can be performed only when the "TV Guide Type" is set to
"Astra 19.2°E only".
TV Guide Type
Type of the TV Guide is setup.
[Astra 19.2°E Astra 19.2ºE is a TV Guide system for
only] Germany and Austria, where the TV Guide
§1
data is sent through Astra 19.2ºE. TV Guide
for up to 14 days of 50 major stations preset in
this unit will be displayed.
[Others] "Others" is a TV Guide system for areas other
§2
than Germany and Austria, where the TV
Guide data is sent through other satellites (not
Astra 19.2ºE), which will display TV Guide for
up to 7 days.
When "Deutschland" or "Österreich" is selected in the Country
§1
Setting of Auto-Setup
When "Schweiz", "Suisse", "Svizzera", or "Česká republika" is
§2
selected in the Country Setting of Auto-Setup
Initialize
≥Press [OK] to show the following settings.

Shipping Condition

All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
[Yes] [No]

Default Settings

All the settings other than the tuning settings, clock settings,
country settings, language settings, disc language settings,
ratings level, ratings password, remote control code, return to
the factory presets.
[Yes] [No]
RQT9193
67