Timer Recording Via External Units - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

FUNCTIONS
Setup
AV2 Settings
AV2 Input
Tuning
Disc Ext Link
Picture
Sound
Ext Link
Display
Connection
Ext Link 1
VHS
Ext Link 2
Others
SELECT
ENTER
RETURN

Timer Recording via external units

RGB / Video
Setting for external units (EXT LINK)
Ext Link 1
You control the recording function via an external unit (e.g. a receiver) with EXT LINK.
Connect the unit to the AV2 terminal with a 21-pin Scart cable.
Press FUNCTIONS, select [To Others] with
Select [Setup] with
Select [Connection] with
Select [Ext Link] with
Select [Ext Link 1] or [Ext Link 2] with
Ext Link 1: For digital receivers that send a special recording control signal, e.g.
the F.U.N. receiver (TU-DSF41).
Ext Link 2: External recording control for satellite or digital receivers (video signal).
The Ext Link 2 setting cannot be used if the input signal is in NTSC format.
The beginning of the recording may not be recorded correctly.
Recording programming on an external unit
The programming for a Timer Recording takes place on an external unit. Read the
operating instructions for your external unit.
EXT LINK
Switching the DVD Recorder to recording standby mode
Select recording drive DVD or VHS with DRIVE SELECT.
Press EXT LINK.
Recording standby mode for EXT LINK-controlled recordings is activated. The
selected drive and EXT-L appear on the display.
The recording begins if an appropriate signal is received from a connected unit. As
long as a video picture is transmitted by the external unit, the selected drive will
record it.
Switching off recording standby mode
Press EXT LINK to switch off recording standby mode.
EXT-L disappears from the display.
Prematurely cancelling recording
Stop the transfer of the recording signal on the external unit.
Press EXT LINK to switch off recording standby mode.
EXT-L disappears from the display.
Playback during Ext Link mode
Press DIRECT NAVIGATOR.
Select a title with
Press STOP
Press RETURN to leave the DIRECT NAVIGATOR.
and press ENTER.
and [AV2 Settings] with ,
and confirm with ENTER.
and start playback with ENTER.
or DIRECT NAVIGATOR to end playback.
DVD
and press ENTER.
and press ENTER.
and confirm with ENTER.
VHS
RAM
53