Table of Contents
Advertisement
Troubleshooting Guide
Playback Issues
You have forgotten your ratings
password.
Quick View (Play x1.3) does not
work.
The resume play function does not
work.
The Video CD picture does not
display properly.
Time Slip, Manual Skip, etc. do not
work.
It takes time before play starts.
Picture stops.
Cannot see the beginning of the
title played.
Playback Issues
On-screen display indicators do
not appear.
The grey background appears
during playback.
Playback Issues
Cannot hear the desired audio
type.
There is noise when playing a
video tape.
Playback Issues
The playback screen flickers.
Recording Issues
Timer recording does not work
properly.
100
Downloaded From Disc-Player.com Panasonic Manuals
RQT9089
Operation (Continued)
•
With the tray open, press [DRIVE SELECT] to select the DVD drive, press and
hold [ * REC] and [ q ] on the main unit simultaneously for about 5 or more
seconds.
•
This does not work when audio is other than Dolby Digital.
•
This does not work while recording in XP or FR mode.
•
Memorized positions are cancelled when
–
press [ g STOP] several times.
–
open the disc tray.
turn off the power.
–
SD CD VCD
USB
–
a recording or timer recording was executed.
•
When connecting to Multi-system TV, select "NTSC" in "TV System" in the
Setup menu.
•
When connecting to PAL TV, the lower part of the picture cannot be displayed
correctly during search.
•
These functions do not work with finalised discs.
•
Time Slip does not work when the unit's "TV System" settings are different
from the title recorded on the disc.
•
This is normal on DivX video. (DivX)
•
Picture may stop if the DivX files are greater than 2 GB. (DivX)
•
(If connecting to a TV that supports VIERA Link with an HDMI cable)
When [
PLAY] is pressed on this unit's remote control, you may not be able
q
to see the beginning of the title played until the picture is displayed on the TV.
Using [ u ] or [ t ], return to the beginning of the title.
VHS Picture
•
Select a setting other than "Off" in "On-Screen Messages" in the Setup menu.
–
Press [STATUS ] to show the on-screen display indicators.
•
You are playing a blank or poor quality portion of the tape.
•
You can damage the unit if you play dirty or damaged tapes and this can
cause the grey background to appear.
VHS Sound
•
Press and hold [
STTL
•
Adjust the tracking.
•
The tape is old or damaged.
VHS Play
•
The video head is dirty.
•
The tape is old or damaged.
•
Check the "SQPB" setting.
Recording/Timer Recording/Copying/External input
•
The timer programme is incorrect or different timer programme times overlap.
Correct the programme.
•
The programme is not in timer recording standby. ("z" in the timer recording
list is not on.)
1 Press [PROG/CHECK].
2 Press [e, r] to select the programme and press the "Red" button.
•
The clock is not correct. Set the clock.
•
The programme information in the GUIDE Plus+ system may not be correct. It
is recommended to modify the start and end times to allow a margin of a few
minutes.
] for about 5 or more seconds to select the audio.
Page
94
−
−
−
82
−
−
82
−
−
−
Page
47, 82
−
−
Page
47
47
−
Page
7
−
83
Page
35
35
14
22
Advertisement
Table of Contents
