Printing A Proof Copy - Konica Minolta BIZHUB 350 User Manual

Printing documents
4.3

Printing a proof copy

Before printing a large number of copies, a single proof copy can be printed
to be checked before the remaining copies are printed.
When printing the remaining copies from the control panel, settings for the
following can be changed.
Available Functions
# of Sets
Single-Sided/Double-Sided
Staple settings
Hole-Punch
Crease
bizhub 350/250 (Phase 2.5)
Description
Specifies the number of copies to be printed. Use the key-
pad to type in a number between 1 and 999.
Select whether a single-sided or double-sided copy is to be
printed.
Either "Corner Staple" or "2 Staples" can be selected.
To specify the stapling position, touch [Position Setting].
Whether the pages are stapled at the top or on the left side
can be specified.
Holes can be punched in the pages. To specify the hole-
punching position, touch [Position Setting].
The pages can be folded in half.
If the print command is sent from the computer, the setting
for this function can be specified is "Booklet" is selected.
4
4-15