Printing documents
–
Print: Select whether a single-sided or double-sided copy is to be
printed.
–
[Change Settings]: Sort, staple and punch settings can be
specified.
–
[Print]: Touch to print with the specified settings.
8
To specify sort or staple settings, touch [Change Settings].
A screen appears, allowing you to change the settings.
9
Select the desired sort, staple and
punch settings.
–
If staple or punch settings were
specified, touch [Position Setting]
to specify the position of the
binding margin.
–
We recommend that "Auto" be
selected for the position.
–
The staple settings are available
only if the optional finisher is
installed.
–
The punch settings are available
only if the optional finisher and
punch unit are installed.
–
The "Crease" setting is available
only if the optional finisher and
saddle stitcher are installed.
10
Check the document information, and then touch [Print].
The document is printed.
11
Touch [OK] when the confirmation message appears.
bizhub 350/250 (Phase 2.5)
4
4-9