Specifying The 2In1 Setting; Specifying The 2-Sided Tx Setting - Konica Minolta BIZHUB 350 User Manual

3

Specifying the 2in1 setting

1
Touch [Menu].
2
Touch [Setting 1], then [2in1].
– Touch the key again to cancel the
settings.
The key is highlighted.

Specifying the 2-Sided TX setting

1
Touch [Menu].
2
Touch [Setting 1], then [2-Sided TX].
3
Select the binding position.
– Left Bind: The document is
scanned with a binding margin on
the left side.
– Top Bind: The document is
scanned with a binding margin at
the top.
– Auto: The binding margin is set
according to the scanning
direction.
4
Touch [Original Direction].
3-18
Saving documents
bizhub 350/250 (Phase 2.5)