Printing The Result Report - Konica Minolta BIZHUB 350 User Manual

3

Printing the result report

The conditions for printing the result report can be specified.
The conditions for printing the result report are preset with the Report
Settings parameters from the Administrator Management 1 screen. Follow
the procedure described below to change these conditions.
The following settings can be specified.
Setting
Default
ON
If TX Fails
OFF
Note
For details on the settings available from the Administrator Management
screen to print the result report, refer to the User manual [Network
Scanner Operations].
3-16
Description
Select this setting to apply the displayed print conditions spec-
ified in Administrator mode.
Select this setting to print the report, regardless of the transmis-
sion result.
Select this setting to print the report if the data could not be
saved.
Select this setting to not print the report, regardless of the trans-
mission result.
Saving documents
bizhub 350/250 (Phase 2.5)