Ntp Server Address - Konica Minolta BIZHUB 500 User Manual

Specifying Settings From the Control Panel

NTP Server Address

The IP address of the NTP server can be specified.
1
In the Time Adjustment Setting, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
3
Enter the host address (IP address or host name (up to 255
characters)).
– To edit the values that you entered with "IP Address Input", touch
[
and enter the new value.
– To clear all values, press the [C] (clear) key.
– If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The NTP server address is set.
bizhub 500/420 (Phase 2)
] or [ ] to move the cursor to the desired area, touch [Delete],
4
4-121