Available Scanning Functions - Konica Minolta BIZHUB 500 User Manual
Network scanner operations
Hide thumbs
Also See for BIZHUB 500:
- Service manual (958 pages) ,
- User manual (794 pages) ,
- Shortcut manual (24 pages)
Table of Contents
Advertisement
2
2.2
Available Scanning Functions
"Scanning" refers to the operation of reading the image of a document fed
through the ADF or placed on the original glass. The scanning functions can
be used to temporarily store the scanned data in the internal memory of the
machine and transmit the data in an e-mail message over the network or
upload the data to a file server.
With the scanning functions, data can be sent to up to 516 destinations at
the same time.
In addition, if an optional hard disk is installed, the data can be stored on the
hard disk of this machine. This function can be used from the Box mode,
which is described in the User manual [Box Operations].
Note
The maximum number of destinations that can be selected at the same
time is 516 (500 programmed destinations, 5 e-mail, FTP and SMB
destinations entered directly and 1 box destination (Only when the hard
disk is installed)).
2-4
Before Using the Scan Functions
bizhub 500/420 (Phase 2)
Advertisement
Table of Contents
