3
3
Touch [Scan Settings] to check the specified scan settings. The
specified settings can also be changed.
–
For details on the scan settings, refer to "Specifying the Scan
Settings" on page 3-49.
4
After checking the settings, touch [OK].
5
Load the document into the ADF or position it on the original glass of
the machine.
6
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
3-10
Scanning Documents
bizhub 500/420 (Phase 2)