Address Type Symbol Display - Konica Minolta BIZHUB 500 User Manual

Specifying Settings From the Control Panel

Address Type Symbol Display

You can specify whether to display the symbol of the address type. (Default
setting: ON)
1
In the User Setting screen, touch [2 Display Setting].
2
Touch [3 Scan Basic Screen Default Setting].
3
Touch [Address Type Symbol Display].
4
Touch the button for the desired setting.
Note
To display the User Setting screen, refer to "To display the User Setting
screen" on page 4-8.
bizhub 500/420 (Phase 2)
4
4-39