Konica Minolta BIZHUB 500 User Manual page 235

Network scanner operations

Hide thumbs Also See for BIZHUB 500:

Table of Contents

Specifying Settings From the Control Panel

If the LDAP server settings are not specified correctly, network failure

may occur. The server administrator should specify LDAP settings.

Be sure to use an authentication method like the one that is used by the

LDAP server. For details, refer to the manual of the LDAP server being

If the authentication method is specified as "GSS-SPNEGO", enter the

domain name for "Active Directory".

Depending on the authentication method, settings for the following

parameters must be set correctly on the Setting Up LDAP screen (6/6) in

order to perform the "Check Connection" operation.

For [Simple] and [DIGEST-MD5]: Login Name

For [GSS-SPNEGO]: Login Name and Domain Name

bizhub 500/420 (Phase 2)