Konica Minolta BIZHUB 500 User Manual page 74

3
7
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the Scan
Settings" on page 3-49.
8
After specifying the settings, touch [OK].
9
Load the document into the ADF or position it on the original glass of
the machine.
10
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
3-34
Scanning Documents
bizhub 500/420 (Phase 2)