Guide To Sms Settings - Panasonic KX-TCD220G Operating Instructions Manual

TCD220G(e-g).book Page 38 Thursday, January 20, 2005 11:43 AM
SMS (Short Message Service)

Guide to SMS settings

If the base unit is reset to its default settings
(Seite 29), the following SMS-related settings will
be reset.
SMS settings Default
setting
SMS on/off
Ein
Message
09003266
*1
Centre 1
900
Message
*2
Centre 2
Private
*3
mailboxes
PBX line access
Aus
number
*1 If you reset the base unit by selecting
"Österreich" as the country (Seite 29), the
default setting will be "0800201203".
*2 If you reset the base unit by selecting
"Österreich" as the country (Seite 29), the
default setting will be "0800201267".
*3 If you reset the base unit by selecting
"Österreich" as the country (Seite 29), this
setting is not shown.
Hinweis:
L If the base unit is reset to its default settings,
the contents of the receive and send lists will
be erased.
Creating private mailboxes (for
German users only)
Private mailboxes can be used for sending and
receiving SMS messages. Each private mailbox
is password protected.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Allgemein", then press {>}.
4
Select "Einstellungen", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 29).
6
Select "Private Mailbox", then press
{>}.
38
7
8
9
Page
10
Seite 32
11
Seite 33
Hinweis:
L To receive SMS messages using a mailbox,
— Seite 33
Changing private mailbox settings
— Seite 38
(for German users only)
You can change the password or name of the
Seite 39
private mailbox and erase the mailbox.
1
2
3
4
5
6
7
8
9
10
11
12
Hinweis:
L If you change the name of a mailbox which has
L If you erase a mailbox, its messages will also
Select the desired new mailbox number
("Mailbox1" to "Mailbox6"), then press
{>}.
Enter a name for the mailbox (5 characters
max., Seite 40), then press {j/OK}.
Enter a 4-digit password for the mailbox, then
press {j/OK}.
Select "Speichern", then press {>}.
Press {ih}.
inform others of your mailbox number.
Press {j/OK}.
Select "SMS", then press {>}.
Select "Allgemein", then press {>}.
Select "Einstellungen", then press {>}.
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 29).
Select "Private Mailbox", then press
{>}.
Select the desired mailbox name, then press
{>} 2 times.
Enter the mailbox's 4-digit password.
Edit the mailbox name (5 characters max.,
Seite 40), then press {j/OK}.
L To erase the mailbox, press and hold
{C/T}, press {j/OK}, select "Ja", press
{>}, then press {ih} to finish.
Enter a 4-digit password for the mailbox, then
press {j/OK}.
Select "Speichern", then press {>}.
Press {ih}.
messages in the receive list, the messages will
remain in the receive list under the new
mailbox name.
be erased.