Connections - Panasonic KX-TCD220G Operating Instructions Manual

TCD220G(e-g).book Page 8 Thursday, January 20, 2005 11:43 AM
Preparation
Display icon Meaning
Handset is accessing base
L
unit. (intercom, paging,
changing base unit settings,
etc.)
Handset is on an outside
k
call.
Call bar is on. (Seite 23)
o
Answering system is on.
u
(Seite 42)
Battery strength
5
Voice enhancer is set to high
[VE]
or low tone. (Seite 12)
Night mode is on. (Seite 22)
[N]
Key lock is on. (Seite 12)
[X]
Handset number: The left
[2]
icon shows handset 2
example. (Seite 23)
Base unit number: The left
-2-
icon shows base unit 2
example. (Seite 23)
New SMS message
F
received (SMS users only;
Seite 36)
New voice mail message
0
received (voice mail users
only; Seite 31) (For Austrian
users only)
Line is being used by
another handset.
8

Connections

When the AC adaptor is connected, a short beep
will be heard. If it is not heard, check the
connections.
Hooks
(220–240 V, 50 Hz)
To telephone
network
Wichtig:
L Use only the AC adaptor and telephone line
cord supplied with this unit.
Hinweis:
L After connection, you must charge the
batteries to make or answer calls (Seite 9).
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.