Answering Calls - Panasonic KX-TCD220G Operating Instructions Manual

Digital cordless answering system
Hide thumbs Also See for KX-TCD220G:
Table of Contents

Advertisement

TCD220G(e-g).book Page 13 Thursday, January 20, 2005 11:43 AM
Recording a telephone conversation
You can record your conversation while on an
outside call.
Wichtig:
L Before recording a conversation, you should
inform the other party that the conversation will
be recorded.
1
Press {j/OK} during a conversation.
2
Select "Gespräch aufz.", then press
{>}.
3
To stop recording, press {j/OK}.
Hinweis:
L Recorded conversations are treated as new
messages.
L To listen to the recorded conversation, see
Seite 43.
L If message memory becomes full, "Speicher
Voll" is displayed and recording stops. Erase
unnecessary messages (Seite 43).
L While recording a conversation, you cannot
change the tone quality of the handset.

Answering calls

1
Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer a call by pressing any
dial key from {0} to {9}, {*}, {#}, or {INT}.
(Any key answer feature)
2
When finished talking, press {ih} or place
the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the handset
off the base unit. You do not need to press {C}.
To turn this feature on, see Seite 23.
To adjust the ringer volume when an outside
call comes in
Press {e} or {v} when an outside call comes in.
Hinweis:
L The ringer volume cannot be adjusted if the
handset is on the base unit.
Making/Answering Calls
Other features
Handset locator
Using this feature, you can locate the handset if it
has been misplaced.
1
Press {x} on the base unit.
L The base unit will page the handset for
about 1 minute.
2
To stop paging, press {x} on the base unit
or press {ih} on the handset.
13

Advertisement

Table of Contents
loading

Table of Contents