TCD220G(e-g).book Page 9 Thursday, January 20, 2005 11:43 AM
Battery installation
1
Insert the batteries negative (T) terminal
first.
2
Close the handset cover.
Hinweis:
L Use only rechargeable batteries (Seite 5).
Battery charge
Place the handset on the base unit for about 7
hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
Hinweis:
L It is normal for the handset to feel warm during
charging.
L It takes 7 hours to fully charge the batteries,
however, you can use the handset before the
batteries are fully charged.
L Clean the charge contacts (Seite 7) of the
handset and base unit with a soft, dry cloth
once a month, otherwise the batteries may not
charge properly. Clean more often if the unit is
exposed to grease, dust or high humidity.
Battery strength
Battery icon
Battery strength
High
5
Medium
6
Low
7
When flashing: Needs to
be charged.
Hinweis:
L When 7 flashes, recharge the handset
batteries. 7 will continue to flash until the
batteries have been charged for at least 15
minutes.
L If the handset is turned off, it will be turned on
automatically when it is placed on the base
unit.
Preparation
9