Guide To Sms Settings - Panasonic KX-TCD240E Operating Instructions Manual

TCD240E(e).book Page 44 Thursday, June 9, 2005 9:14 AM
SMS (Short Message Service)
Editing the sender's number
before calling back
1
While reading a received message,
press {j/OK}.
2
Select "Edit and Call", then press
{>}.
3
Edit the number, then press {C} or
{s}.

Guide to SMS settings

If the base unit is reset to its default settings
(page 36), the following SMS-related
settings will be reset.
SMS settings
SMS on/off (default: "On")
Message Centre 1
Message Centre 2
Private mailboxes
(default: —)
PBX line access number
(default: "Off")
Note:
L If the base unit is reset to its default
settings, the contents of the receive and
send lists will be erased.
Creating private mailboxes
Private mailboxes can be used for sending
and receiving SMS messages. Each private
mailbox is password protected.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Public", then press {>}.
4
Select "Settings", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
35).
44 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
6
Select "Private Mailbox", then
press {>}.
7
Select the desired new mailbox number
("Mailbox1" to "Mailbox6"), then
press {>}.
8
Enter a name for the mailbox (5
characters max., page 46), then press
{j/OK}.
9
Enter a 4-digit password for the mailbox,
then press {j/OK}.
10
Select "Save", then press {>}.
11
Press {ih}.
Note:
L To receive SMS messages using a
mailbox, inform others of your mailbox
number.
Page
Changing private mailbox
page 40
settings
page 40
You can change the password or name of
page 40
the private mailbox and erase the mailbox.
page 44
1
Press {j/OK}.
2
Select "SMS", then press {>}.
page 45
3
Select "Public", then press {>}.
4
Select "Settings", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
35).
6
Select "Private Mailbox", then
press {>}.
7
Select the desired mailbox name, then
press {>} 2 times.
8
Enter the mailbox's 4-digit password.
9
Edit the mailbox name (5 characters
max., page 46), then press {j/OK}.
L To erase the mailbox, press and hold
{C/T}, press {j/OK}, select "Yes",
press {>}, then press {ih} to
finish.