Making/Answering Calls; Making Calls - Panasonic KX-TCD220G Operating Instructions Manual

TCD220G(e-g).book Page 11 Thursday, January 20, 2005 11:43 AM

Making calls

1
Lift the handset and dial the phone number.
L To correct a digit, press {C/T}, then enter
the correct number.
2
Press {C}.
3
When finished talking, press {ih} or place
the handset on the base unit.
Speakerphone
The handset features a digital speakerphone,
which allows you to have hands-free
conversations.
1
During a conversation, press {s} to turn on
the speakerphone.
L Speak alternately with the caller.
2
When finished talking, press {ih} or place
the handset on the base unit.
Hinweis:
L For best performance, please note the
following:
– Use the speakerphone in a quiet
environment.
– If you or the other party have difficulty
hearing each other, press {e} or {v}
repeatedly to adjust the speaker volume as
necessary.
L To switch back to the receiver, press {C}.
To adjust the receiver or speaker volume
Press {e} or {v} while talking. 4 volume levels
are available for the receiver. 6 levels are
available for the speaker.
Redial feature
Previously dialled phone numbers (each 24 digits
max.) can be redialled.
To redial the last number dialled
Press {R}, then press {C} or {s}.
L If {s} is pressed, the unit will redial
automatically if the other party's line is
engaged.
Hinweis:
L You can also press {C} or {s} before
pressing {R}.

Making/Answering Calls

To make a call using the redial list
The last 10 phone numbers dialled are stored in
the redial list.
1
Press {R}.
L The last number dialled will be displayed.
2
Press {e} or {v} repeatedly to select the
desired number.
L To exit the list, press {ih}.
3
Press {C} or {s}.
L If {s} is pressed, the unit will redial
automatically if the other party's line is
engaged.
To redial automatically
If you press {s} when redialling and the other
party's line is engaged, the unit will redial the
phone number again automatically. The unit will
redial up to 11 times. While the handset is waiting
to redial, {s} will flash. While the handset is
redialling, mute is automatically turned on.
Hinweis:
L Automatic redial is cancelled when any button
(except {R}) is pressed.
L If mute does not turn off after the line is
connected, press {C/T}.
To edit a number in the redial list before
calling it
1
Press {R}.
2
Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3
Select "Bearb.&Anrufen", then press
{>}.
4
Press {<} or {>} to move the cursor, then
edit the number.
L Place the cursor on the number you wish
to erase, then press {C/T}.
L Place the cursor to the right of where you
want to insert a number, then press the
appropriate dial key.
5
Press {C} or {s}.
To erase numbers in the redial list
1
Press {R}.
2
Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
11