Table of Contents
Advertisement
Making/Answering Calls
Making calls
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M
N
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M
N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M
N
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MERASEN
3
MbN: "Yes" a MSELECTN a MOFFN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 19).
14
TG433CSK_(en_en)_0122_ver011.pdf
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time
you press MDN (Pause) on the handset.
Answering calls
1
Lift the handset and press M
when the unit rings.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 22).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Adjusting the base unit ringer volume
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
until the unit beeps.
14
N
N or M
N
N.
2014/01/22
19:17:39
Advertisement
Table of Contents
