Table of Contents
Advertisement
Inside the Copier
Lock Release Lever:
Toner Bottle Holder:
Original Pad:
Original Glass:
Corona Unit Cleaning Lever
(Upper/Lower):
Imaging Unit Lock Release
Lever:
Dehumidifier Switch:
Fusing Unit Lock Handle:
1149o081
Turn clockwise to swing up the Upper Half of the copier to clear a
paper misfeed.
Swing open to replace the Toner Bottle.
p. 5-6
Holds the original in position on the Original Glass.
Place the original face down on this Glass.
Operate the Lever to clean the corresponding Corona Unit if
unwanted lines are produced on the copy.
Operate when replacing the Imaging Unit.
(For Technical Representative only)
Turn ON to prevent condensation from forming on the PC Drum
when power is turned OFF.
(For Technical Representative only)
Hold onto this Handle when lifting the Upper Half of the Fusing
Unit.
p. 5-13
3. Copier Parts and Accessories
1149o082
p. 7-11
2-7
Advertisement
Table of Contents
