Inside The Copier - Minolta EP2010 Operator's Manual

Inside the Copier

3
2
1
Lock Release Lever : Turn clockwise to swing up the Upper Half of the copier to clear a
1
Toner Bottle
2
Holder
Original Pad
3
Original Glass
4
Corona Unit
5
Cleaning Lever
(Upper/Lower)
Imaging Unit Lock
6
Release Lever
Dehumidifier
7
Switch
Fusing Unit Handle : Hold onto this Lever when lifting the Upper Half of the Fusing Unit.
8
4
1139O2040A
5
paper misfeed.
: Swing open to replace the Toner Bottle.
p. 63
: Holds the original in position on the Original Glass.
: Place the original face down on this Glass.
: Operate the Lever to clean the corresponding Corona Unit if unwanted
lines are produced on the copy.
: Operate when replacing the Imaging Unit.
: Turn ON to prevent condensation from forming on the PC Drum when
power is turned OFF.
(For Technical Representative only
p. 69
2. Copier Parts and Accessories
8
p. 95
9
6
7
1139O1030A