Table of Contents
Advertisement
82
2. The Copier is not functioning as designed
Symptom
The Control Panel shows nothing.
No copies are fed out when th
Start Key is pressed.
Control Panel Keys do not respond. The Interrupt Key LED is lit up.
The copier is not activated when
the Power Switch is turned ON.
If these procedures do not correct the problem, turn OFF the Power Switch, unplug the power cord
*
from the power outlet and contact your Technical Representative.
Check for:
Is only the Start Key lit up green
The copier is in the Auto Shut OFF
Mode.
p. 1
The Wait Indicator is lit up.
The Warning Indicator is lit up.
Interrupt
1139O2602A
The power cord is left unplugged
from the power outlet.
The room circuit breaker is open.
Action
The copier is in the Energy Saver
Mode.
Press any key on the Control Panel
to cancel the Energy Saver Mode.
p. 1
Turn the Power Switch ON.
The copier was just turned ON and
is warming up. Please wait.
Check the Control Panel and take
action according to the particula
Indicator.
p. 59
The copier is in the interrupt mode.
Press the Interrupt Key to cancel
the interrupt mode.
p. 16
Plug the power cord into the power
outlet.
Close the room circuit breaker.
Advertisement
Table of Contents
