Table of Contents
Advertisement
60
1.
When the Add Paper Indicator Lights Up
Auto
Photo
Lighter
Darker
Auto / Photo
A
Example: 1st Drawer has run out of
paper.
Adding Paper
1st Drawer
Slide out the 1st Drawer and press
1
down the Paper Lifting Plate.
Slide out the Edge Guides.
2
Load the paper stack into the Drawer
3
so that its front side faces down.
Make sure that the paper stack rests
under the two catches of the Drawer.
When the Drawer currently selected for use has run out of
paper, the Add Paper Indicator lights up. At this time, you
cannot start a new copy cycle.
Fan the paper thoroughly.
Auto
A3
B4
A4
FLS.
Inch
A4
A5
Paper
1151O071DA
1151O071DA
Use the following procedure to load paper into the
Drawer.
1139O0400A
1139O0390A
1139O0410A
front side
NOTE
Slide the Edge Guides up against the
4
paper.
Gently slide the Drawer back in.
NOTE
When loading Inch Size paper into
the Drawer, flip the Marketing Area
Switch located in the rear left corner
of the Drawer to "Inch".
1139O1370A
The paper should be
loaded no higher than
the
(Max. Level
Indicator) on the Edge
Guide.
1039O0420A
Advertisement
Table of Contents
