When This Type Of Copy Is Produced; The Image Is Too Dark; The Copy Is Blurry - Minolta EP2051 Operator's Manual

80

1. When This Type of Copy is Produced

Symptom
The image is too light.

The image is too dark.

The copy is blurry.

Possible Cause
The exposure level for the Auto
Exposure Mode is set at one of th
"Light" levels.
The manual exposure level is set
1074O108
on the lighter side.
You have been making copies from
a photo or an original with a large
dark area.
The Toner has just been
replenished.
The Add Toner Indicator is lit up
on the Control Panel.
The paper is damp.
The exposure level for the Auto
Exposure Mode is set at one of th
"Dark" levels.
The manual exposure level is set
1074O109
on the darker side.
The entire surface of the Original
Glass is dirty.
The original is not held tightly
against the Original Glass.
The paper is damp.
1074O110
Action
Change the setting of the User's
Choice (Exposure Priority).
p. 5
Cancel the Auto Exposure Mod
and select the Manual Exposure
Mode to adjust the exposure level
to obtain a darker image.
p . 3
Press the Exposure Control Key a
necessary to obtain a darker image.
p. 3
The copier needs more toner.
Replenish toner by using the Toner
Replenisher Function. p. 5
The copier needs more toner.
Replenish toner by using the Toner
Replenisher Function .
Replace the Toner Bottle with
new one. p. 63
Replace the paper. p. 60
Change the setting of the User's
Choice (Exposure Priority).
p. 5
Cancel the Auto Exposure Mod
and select the Manual Exposure
Mode to adjust the exposure level
to obtain a lighter image.
p. 3
Press the Exposure Control Key a
necessary to obtain a lighter image.
p. 3
Wipe the Original Glass clean with
a soft dry cloth. p. 88
Place the original in position so
that it is held tightly against the
Original Glass.
Replace the paper.
p. 5