Table of Contents
Advertisement
2.
When the Add Toner Indicator Lights Up
0.5~2.0
Auto
A4
A3
Auto
B4
A3
Photo
Full Size
B4
A4
Darker
A3
A4
uto / Photo
Full Size
A
Replacing the Toner Bottle
Open the Front Door.
1
Swing open the Toner Bottle Holder
2
and pull out the Toner Bottle.
Shake a new Toner Bottle well.
3
With the Seal on the Toner Bottle
4
facing up, slowly peel off the Seal as
illustrated.
Auto
A3
B4
A4
FLS.
Inch
A4
A5
Paper
1151O072DA
1151O072DA
1139O1380A
1139O1410A
1139O1390A
1139O1420A
The Add Toner Indicator lights up when toner
in the Toner Bottle is running out.
You can still make copies, but the image
density will become lighter and lighter. It is
recommended, therefore, that you replace the
Toner Bottle with a new one as soon as
possible.
NOTE
Be careful, some toner may puff out from
the bottle.
Ensuring that the arrows
5
Toner Bottle are facing you, insert the
Bottle into position.
NOTE
Insert the Bottle all the way into the
copier until the
Bottle is aligned with the
on the Toner Bottle Holder.
Swing the Toner Bottle Holder closed
6
and close the Front Door.
NOTE
Use ONLY the specified toner for this
copier. Using any other toner coul
result in image trouble.
Auxiliary Toner Replenisher Mode
Use the Auxiliary Toner Replenisher
Mode if the image is light immediately
after the Toner Bottle has been replaced
with a new one.
63
) on the
1139O1420A
marking on the
marking
p. 5
Advertisement
Table of Contents
