Konica Minolta 9760 User Manual page 46

12 DISTINCTIVE RING
Some telephone carriers offer a service called Distinctive
Ring. Distinctive Ring lets you have different numbers on
one line, each with its own distinctive ring. You can then
use one number exclusively as a fax number without the
expense of a second line. (Your local telephone carrier can
provide you with more information about this service,
which usually has an additional charge.) To use this
function, refer to Setting Distinctive Ring below.
Available settings are OFF (default) and ON.
!
You must have your local telephone carrier's Distinctive
Ring service.
Your fax machine must be in FAX or PC answer mode,
and the PBX dial parameter must be set to OFF. Other
modes—TEL, TEL/FAX, or TAD—will override
Distinctive Ring.
This feature may not work properly if you have a
telephone other than a genuine Konica optional
handset connected to your fax machine.
Setting Distinctive Ring
To set up your fax machine to recognize another ring
pattern:
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
|
46 KONICA FAX 9760
The display shows
1:FUNC. PROGRAMMING.
3 Press the Yes § key. The display shows
FUNCTION NO. [ ].
4 Using the numeric keypad, enter 12. The display shows
DISTINCTIVE RING, OFF.
5 Press the No © key two times. The display changes to
DISTINCTIVE RING, SET.
6 Press the Yes § key. The display changes to
SETUP FAX RING
CALL FAX NUMBER NOW.
7 Using a separate telephone line, dial the number
assigned to the fax machine within 90 seconds—if you
don't have access to a second line, have someone else
make the call for you. When your fax machine begins to
ring, it automatically detects and remembers its assigned
ring pattern. Be sure to let it ring until either RESULT=OK